- Machine Type: Carding Machine
- Place of Origin: Shanxi China (Mainland)
- Model Number: SXF1278
- Material Capabilities: Yarn
- Brand Name: HONGJI
SXF1278 COMBING FRAME
High-speed productivity
Through optimization of the headstock drive, designed nipping rate is 500 times/min, feed lap weight up to 80g/m, and output up to 70kg/h.
High-quality web (High-quality cotton web)
1.Adjust the nipper stress of the entire machine can be adjusted collectively, thus strengthening the grip control of fibers.
2.With single-eye photoelectric control on the delivery table, it's convenient to install and adjust, and the monitoring of the machine is reliable.
3.The anti-static device can release electrostatic from the separating roller, reduce lapups, and the web is much clearer.
4.High-quality imported stainless steel guide plate, bended rationally, smooth surface, no fiber burring, reducing edge and hole damage of web.
Saving cotton
Due to rational cooperation between cylinder and nipper, it reduces damage to long fibers, saving noil by 2% as compared with previous Combing Frames.
Good quality of sliver
1. 3 over 3 rolls draft mechanism can realize the optimal draft distribution, further improving uniformity.
2. Online detection can achieve real-time supervision of drafting status, and ensure the stability of mechanical condition, making the sliver up to our desired targets.
3. According to the feedback information of the detector, the drive can command the frequency motor to change its speed, modify the multiple of main drafting, stabilize sliver weight, enhances evenness cv%, and is especially propitious to spinning of blend yarn.
Standard configuration
No. of nipper and gauge | 8,470mm |
Speed | Max 500 nips/min, technical speed 400 nips/min |
Drafting | 8∼20times |
Yarn length | 25∼51mm0.984∼2in |
Supply lap | Ø500×300mm |
Lap count | 60∼80g/m60∼80Ktex |
Sliver count | 15∼30g/5m3∼6Ktex |
Noilage | 8∼25 |
Theoretic production | 70 kg/h |
Normal production | 35∼45kg/h |
Can dimension | Ø600×1200mmØ 24×48in |
Power | 7.35kw (without suction motor), 10.35kw(with suction motor) |
Compressed air | 0.6∼0.8MPa |
Air consumption | 1.5Nm³/h |
Suction air for one | 2000 m3/h |
Outlet diameter | Ø140mm(without suction motor) Ø200mm(with suction motor) |
Voltage | Three-phases, 380±10% 50HZ (in China),others according to the local requirements |
Machine dimension | 7145×2145×1700mm |
Machine weight | 5500kg |
Equipment configumtion | One set SXF1358C Lap drawing machine matches five setsSXF1278 Combers (1:5) 114 |
| One set SXF1338 Sliver machine , one SXF1348 Ribbon machine matches 4 sets SXF1278 Combers(1:1:4) |
| 114 |
Company Name: | Shanxi Hongji Sci-Tech Co., Ltd. |
---|---|
Company Address: | ECONOMIC AND TECHNICAL DEVELOPMENT ZONE, JINZHONG, SHANXI, CHINA |
Zip: | 030600 |
Contact Person: | Ms. Jiangtao Hei |
Telephone Number: | 86-354-3966669,13935458647 |
Mobile: | 13935458647 |
Fax Number: | 86-354-2411288 |
Email: | zbb9237@126.com |
Homepage: | www.hjfzw.com/ |