- Automatic: Yes
- Type: Spinning Production Line
- Place of Origin: Shanxi, China
- Spinning Method: Ring Spinning
- Model Number: SXF1568C
- Brand Name: HONGJI
SXF1568C RING SPINNING FRAME
This machine is used for a spinning procedure of pure or blend spinning of cotton and short-staple.
The advanced oil showering headstock transmission structure and stable draft system
1.The main transmission system is sealed within the headstock box, and all gears use cyclic oil-spray lubrication, prolonging service life of gears, with much more stable engagement at high speed, much lower noise, and greatly extending maintenance period.
2.The cyclic oil pump and change gear inside the main transmission system are all located in the outward, providing convenience for operation and maintenance.
3.In terms of gear pattern, all drive gears become skewed teeth from traditional straight teeth, and adopt uniform standard in design of gears, forming rational parameters and easy exchange.
4.The elastic spider coupler does not only stop the headstock vibration from passing to the draft system, but also provide very convenient disassembly and maintenance.
5.The roller and front roller head use direct coupling, and the roller axes are in high concentricity, thus it runs stably with high strength
6.The auto-dripping lubrication system provides a comfortable lubricating environment for each pair of gears in draft engagement transmission, and dripping amount can be adjusted according to spinning parameters, meanwhile oil can be saved.
Spinning system with optimal design
1. With the flexible and reliable lifting transmission, the changing of the direction is stable, which ensures the build and satisfy the requirement on the high-speed winder.
2.The optional tandem torsion rods balance or weight balance forms a stable lifting balance system between the ring rail and lappet.
2.Even coupler mass, moderate locking force, stable speed and torque transmission, and integral bearing components make the main shaft have little vibration and low power consumption in high speed rotation.
3.The spindle and the ring are in high concentricity, which ensures the proper balloon and proper tension of the yarn.
4.The hanger rotates flexibly and its stopping power is stable and appropriate, ensuring no cast-off in high-speed spinning unwinding.
5.The main motor is positioned below the cotton suction motor, which is propitious to heat radiation of the main motor and air-conditioning cycle of the workshop.
6.The bellows has rational structure, the blower and filter screen are easy to assemble and disassemble, having a waste box.
7.The draft system adopts optimal design and high manufacture precision, and ensures yarn quality, with wide adaptability. According to user requirements, homemade, SKF and SUEESEN cradles can be provided.
8.According to user requirements, homemade, SKF and NOVIBRA high-speed spindles are equipped.
A Ring spinning frame is adapted to multiple devices
1.Fitted with a slubby yarn device
2.Fitted with a core-spun yarn device
3.Fitted with a overhead cleaner.
4.Fitted with a Reliable and economic automatic doffing system.
Electric control system
1.Main machine is driven by inverter, the spinning speed is adjusted as spinning to reduce breakage in spinning process.
2.With self-cooling inverter avoids the overheat stop because of fly. The temperature can not be hoisted more than 13 normally.
3.A dynamic display screen tracks the running states of machine while featuring a menu guide for operation of the machine as well as self-check malfunction display.
4.Electrical doffing power for optional.
5.A dual-speed motor or inverter for optional.
Change between main motor and inverter (for optional)
The main motor is driven by an inverter at the start and end of the bobbin doffing process. In between the doffing periods, the main motor operates by power.
Main Specification | |
NO. of Spindle(spindles) | Spindle range, from 384516, starts 384 increased by 12 spindles NO. of spindles 384516 |
Spindle Gauge(mm) | 70mm,75mm |
Lifting(mm) | 180mm,205mmBare blade type spindle |
Spindle Speed(r/pm) | 1200020000 r/min |
Twist Direction | single jockey pulley system for Z or S twist |
Yarn Counts | below 40mm,5165mm |
Fiber | Cotton, PC, Blends |
Yarn Counts | 5.897 tex1006Ne |
Twisting | 2301740 t/m5.844t/in |
Total Draft | 1070times(Generally Supplies 1050 times) |
Break Draft Range | 11.5times |
Draft System | 3 rows roller, short or long apron, double draft, cradle compression |
Roving Creel | 6 rows creel, suit for Ø152×406 roving |
Ring Diameter | Ø38Ø42Ø45 |
Broken-end collector | Pneumatic flute type for six spindles and individual suction fan for each frame with integrated under ground air exhaust. |
Voltage | Three phase 380±10% 50HZ China, the broad product may choose according to the local request |
Structure Configuration | ||
Item | Standard Configuration | Optional Configuration |
Main drive | With flat belt | With triangle belt |
In the form of spindle drive | Single jockey pulley | Double jockey pulley |
Twist direction | Z twist | S twist |
Balanced form | Torsion bar | Drag weight |
Suspended creel | 6 rows creel | rows creel+ hovering car |
Doffing | Manual doffing | Electrical doffing |
Drafting | Ordinary draft(cradle) | V draft(pneumatic cradle) |
Tailstock | Ordinary tailstock(1290mm) | Short tailstock(1000mm) |
Company Name: | Shanxi Hongji Sci-Tech Co., Ltd. |
---|---|
Company Address: | ECONOMIC AND TECHNICAL DEVELOPMENT ZONE, JINZHONG, SHANXI, CHINA |
Zip: | 030600 |
Contact Person: | Ms. Jiangtao Hei |
Telephone Number: | 86-354-3966669,13935458647 |
Mobile: | 13935458647 |
Fax Number: | 86-354-2411288 |
Email: | zbb9237@126.com |
Homepage: | www.hjfzw.com/ |