Narrow aisle racking, is a kind of storage shelves, because of its shelf system forklift handling channel compared with it is relatively narrow, so the name of narrow aisle racking. The main body of the shelf system is the beam shelf system, and the material handling forklift is limited to a special "three-way stacking forklift". The three-way stacking forklift slides along the established guide rail. The stacking channel width of the shelf system is slightly greater than the width of the pallet cargo, and the high-density storage requirements are achieved. At the same time, it inherits all the advantages of the beam racking system, all the materials stored by the shelf system are 100% optional, and the forklift can store any pallet at any time. Fast storage efficiency, very high storage density,In today's soaring housing prices, narrow lane racking are liked by many enterprise warehouses. Application: Large amount of stored goods, frequent entry and exit of goods, and high picking requirements for goods. The storage and logistics center urgently needs to increase the number of storage sites or require a certain amount of storage. Logistics efficiency requirements have a relatively high level. The net height of warehouse is higher, more than 8M. Forklift can choose an independent storage forklift, not planning to drive out of the storage forklift to perform other tasks. Notice: ?Narrow aisle racking forklift is divided into two categories of magnetic line and guide rail, here use the latter of the friends should remember that the first layer needs to be placed on the beam, the beam height can not exceed the height of the guide rail, the height of the goods should be in the range of the guide rail. ?During the storage operations, a special forklift truck (three-way stacking forklift truck) also needs to be used to access it, and the forklift truck will slide along the established guide rail. Because the shelf aisle is relatively narrow, so the staff need to strictly follow the work manual to complete. ?Each shelf has its own load limit, and narrow aisle shelves are no exception, so when storing goods, the load of each level should not exceed the maximum load of the shelf, to prevent the shelves from collapsing or tilt. ?Because the channel is relatively narrow, this requires the technology of the forklift master, driving technology should be more skilled, usually work should be careful and cautious.