Product Description Powder metallurgy 31-teeth driven gear. 31 tooth driven gear is the assembly part, the main body is the powder metallurgy gear, and after the heat treatment, a GCr15 material rolling pin is installed.Our company can make changes t

Product Description Powder metallurgy valve rocker arm. Valve rocker arm valve-train belongs to the engine rocker arm, main function is to adjust the valve clearance, prevent engine open at work due to thermal expansion valve, between valve and valve

Product Description Powder metallurgy straight-hole clutch tension block. The taper hole is made up of three flying blocks and a straight clutch seat. All four are powder metallurgy products. FAQ 1. Are you factory or trading company? A: We are facto

Product Description Sintering material parts for decompression assembly. This product also belong to the relief system of motorcycle engine accessories, called the assembly engine valve, is composed of six parts, including powder metallurgy parts for

Product Description Powder metallurgy one-way clutch gear. One - way clutch gear belongs to the second generation adjustment arm fittings, our company monthly output can reach 900,000 pieces.Also our star products. Technical Parameter 1. Gear No.:15

Product Description Powder metallurgy turbine drive gear. Turbine drive gear is a second-generation adjustable arm accessory, which replaces the function of the rack after adjusting pinion and one-way clutch gear. Due to the organic processing techno

Product Description Powder metallurgy adjuster plain bearing. The adjuster plain bearing may bea CAM brake accessory, if it is, it is to replace the brake wheel cylinder with the CAM to the braking effect of the two brake shoes, through the air press

Product Description Powder metallurgy one-way clutch rotor. The one-way clutch roto should be a CAM brake accessory, which is paired with a single clutch stator. It is made of prealloyed powder. The tooth strength requirement is higher, according to

Product Description Powder metallurgy adjuster thrust washer. The thrust washer is made of alloy powder with a density of 6.8/cm and above, with a macroscopic hardness of 35HRC and a single weight of 3.7g. Technical Parameter 1. Weight:3.7g 2. Densit

Product Description Powder metallurgy bearing. Made of Iron Cooper steel, in order to ensure product accuracy, we machined it after heat treatment. The Heat treatment hardness 20-27 HRC.Single weight 31.1 grams, and density above 6.5g/cc. Technical P