Suppliers Suzhou Everfortune Imp. & Exp. Co., Ltd. HQM96 Series Plenum Pulse Dust Collector
Details for China HQM96 Series Plenum Pulse Dust Collector

HQM96 Series Plenum Pulse Dust Collector

HQM96 Series Plenum Pulse Dust Collector
Product Type:

Textile Machinery >> Textile auxiliaries >> dust removal plant

Keyword: Machinery,Industrial Filtration Equipment,Dust Collector
Uses:
Origin:China/Jiangsu
If you are interested, please contact us!
Payment Terms: L/C,T/T
1 2 3 4
Product Detail
  • Place of Origin: Jiangsu China (Mainland)
  • Structure: Bag Filter
  • Function: Dust Collector
Detailed Product Description
Specifications:

HQM series dust collectors are mainly used in cement, metallurgy, chemical and electric power industries.

* Overview:

HQM96 Series Plenum Pulse dust collector integrates the advantages of chambered reverse blow dust collectors and pulse dust collectors and overcomes the shortcomings such as insufficient dust removal strength in chambered reverse blowing and concurrent dust removal by pulse jet and filtration so as to expand the application scope of bag dust collectors. Because the structure of this type of dust collector is featured with applicability for treating high concentration dust, its dust collection efficiency is improved and the life of filter bag is lengthened. Except for being applied in cement industry, it is extensively applied in metallurgy, chemical and electric power industry. Particularly, it can get satisfactory result in dust collection of waste gases from garbage furnace. Therefore, it is an advanced dust collector with excellent performance.

* Primary structure:

This series dust collector is composed of housing, dust hopper, dust discharger, support, pulse dust removing system and electrical control. Adopting chambered structure, the dust collector is divided into several chambers which run independently. Dust is removed by periodic reverse blow of large pulse valve.

* Working principle

After dusty air enters the dust collector from the air inlet, by the action of inertia, the dust of coarse particle in the air directly falls into the dust hopper, which collects primary dust. Later the air flow entering the dust hopper turns to passes through the filter bag with metal framework installed inside, and the dust is collected on the external surface of the filter bag. The cleaned air entering the cleaning room on the upper part of the filter bag chamber is then collected and discharged from the outlet pipe.

With the increase of filtration duration, the dust kept on the filter bag becomes thicker and thicker and the resistance of the filter bags becomes larger and larger. At this time, it will alternatively remove dust from each dust collecting chamber by the given interval. Each dust collecting chamber is provided with a poppet valve. While removing dust, the poppet valve closes to cut off the filtered air flow passing through such dust collecting chamber. Immediately after that, the pulse valve opens to jet high pressure air into the filter bag to remove the dust on the external surface of the filter bags. The pulse width and dust removing period of each dust collecting chamber can be controlled by PLC.

* Technical properties and data:

HQM96 (Single line) Series

Technical parameters / Type

HQM96-4

HQM96-5

HQM96-6

HQM96-7

HQM96-8

HQM96-9

The flow rate (m3/h)

26800

33400

40100

46800

53500

60100

Total filtration area (m2)

372

465

557

657

744

836

Net filtration area (m2)

279

372

465

557

657

744

Number of dust collecting chambers

4

5

6

7

8

9

Total Number of filter bags

384

480

576

672

768

864

Resistance of dust collector (Pa)

1470 ~ 1770

Dust concentration at inlet (g/Nm3)

1300

Dust concentration at outlet (mg/Nm3)

≤30

Negative pressure borne by dust collector (Pa)

5000

Compressed air for removing dust

Pressure (MPa)

(5-7) x 105

Air consumption (m3/min)

1.2

1.5

1.8

2.1

2.4

2.7

Pulse valve

Number (pcs)

4

5

6

7

8

9

Type (inch)

21/2

Poppet valve

Number (pcs)

4

5

6

7

8

9

Type (mm)

Cylinder Ø 100

Rigid impeller feeder

Feed opening 300 x 300mm, speed 30 rpm, reducer power: 1.1 kw

Dust collection program controller

Input voltage AC220V  Output voltage DC24V

Type and material of filter bag

Ø130 x 2450 mm, Polyester pinprick felk, 500g/m2, Application temperature120

Screw dust

conveyor

Type (mm)

Diameter Ø 300

Reducer

Type: XWD5.5-7-1/59  Power: 5.5 KW

Area of hydration layer (m2)

110

120

130

140

150

160

Overall weight (excluding hydration layer) kg

9500

12800

13500

15200

18000

19600

* Note:

1. The net filtration area in the above table means the filtration area of other chambers while one chamber is removing dust.

2. The air consumption in the above table is for central air supply. When a separated air compressor is provided, the air consumption in the above table shall multiply by a coefficient of 1.3.

3. The flow rate in the above table is calculated when filtration air speed is 1.2m/min.

Contact us
Company Name: Suzhou Everfortune Imp. & Exp. Co., Ltd.  
Company Address: 12/F.,International Trade Tower,1638 Xihuan Road,Suzhou China 
Zip: 215004 
Contact Person: Mr. donglin Jia 
Telephone Number: 86-0512-68622022 
Mobile:  
Fax Number: 86-0512-68625516 
Email: main@sinochemsuzhou.com 
Homepage: www.sinochem-sz.com/web-iae/web/index.asp 
Company Info