1. The fibre is mixed by three scientific and effective methods resulting in thorough mixing. 2. The electrical control is incorporated with man-machine interface，PLC control, auto-alarms and interlocking control with the preceding and fo

1. There are three scientific and effective mixing forms used: Air current mixing, pile layer mixing, and concentrated mixing. 2. An uniform and identical mixing effect can be obtained from the machine.The quality of card sliver produced b

1. This machine consists of blade beater, flat steel grid f spike lattice, consolidating lattice, feed lattice, evener roller and mixing hopper, etc. 2. The fed material is spread across the width of the chamber by means of a swing plate f

1. The machine is equipped with a single dust cage to absorb cotton, which forms a single-layer cotton fleece so as to eliminate the tear and sticky-layer of lap. 2. The speed of pedal roller is adjusted instantly and quickly by an autolev

1. Automatic device for lap doffing，lap rod pulling, lap rod changing and new lap forming. 2. Simple and easy adjustment of evener device, speed of fan. setting angle of grid bars and gauge of grid. 3. Automatic feed stopping motio

1. This machine is equipped with a vibrating hopper for feeding. Cotton lumps fall from the vibrating hopper in free form, thus making the transverse density of the cotton layer even and identical. 2. Adopting photocell control ensures the

1. The machine has not only the action of mixing but also the functions of higher opening and cleaning. Its cleaning efficiency is higher than that of the machine of the same kind. 2. The adjusting device of worm gear set outside the machi

1. Along the spiral path of a cylinder, the raw cotton turns over 2.5～6.5 cycles with its removing impurities more gently and sufficiently. 2. Lower power consumption, less area occupied, and higher output. 3. The grid bar adjustin

FA002，A002D and FA003 are both furnished with sawtooth disc rollers.From inside to outside，the toothed discs are divided in three groups from wide to close so that the cotton could be plucked uniformly in smaller tufts.It is favourable for next

1. It is installed with an adjusting plate and infrared photocell device in the reserving trunk to automatically control the height of cotton. 2. The mounting angles of grid bars and gauge between them can be conveniently adjusted by an ou