COLD PROOFING WHITE COATING AGENT KT-55A

COLD PROOFING WHITE COATING AGENT KT-55A

Application: white coating and shade light for fabrics.

Characteristic:

1. Good covering property, high white grade.
2. Excellent cold proofing property, folding endurance, impact-resistant is not changed even under -30°C.
3. Film is much softer than KT-55, but a littble bit thin.
4. Fine and delicate paste, stable and disperse unformly.
5. PU sealant workable. 

Technical indicate:

      Appearance                     white thick paste

      pH value                          ７±0.5

      Ionic                                anionic

Using method:

Step one: water proof treatment and dry fabric.

Step two: bottom coating (eg. FS-800, HCP-30, or HCP-10).

Step three: surface coating for 1 or 2 times with KT-55A, 0.5-1.5% cross

linking agent is recommended.

Step four:       also could be coated with KT-55A without bottom

coating,with 1-2% cross linking agent.

Ecological data:

It is a non-toxicity, non-pollution, and environmental product. General chemicals operations should be obeyed while storing, transporting, and using.

Package and storing:

Be packed in plastic/iron casks of 50/200kg with well-closed package of plastic bag inside. This products should be kept in shady, cool and dry places, with temperature above 0°C. It should be used up within six months.

Note:

The above information is approved. Due to the different technology applied in different mill, the customers should make sure to take the right processing before using them.